Steel String

Ron Belanger M12 12 String Guitar, 2008

On September 4, 2019 /

The Belanger M12 comes from the workshop of Ron Belanger near Orillia, Ontario, between lakes Simcoe and Couchiching. A woodworker for many years, Belanger started building guitars in 1998, and also builds Irish Bouzoukis and resophonic guitars. His influences clearly include top Canadian luthiers including Grit Laskin.

Used

This instrument has sold

Lowden L25 Jumbo Steel String Guitar, 1989

On August 28, 2019 /

This Lowden L25 is in good working order, and dates to 1989 at the shop in Bangor, County Down. It is built using a Red Cedar top paired with Indian Rosewood for the rather deep sides, back, neck stiffeners, head plate and bridge, with Mahogany for the neck and Ebony for the unbound fingerboard. The bridge is a pinless design, with the strings loading through the back edge of the bridge. Tuners are gold plated, with Lowden logos and faux pearloid buttons.

Vintage

This instrument has sold

C. A. Potter Criterion Guitar, Circa 1905

On August 28, 2019 /

Tags: acoustic, C. A. Potter, Canada, cleveland, criterion, guitar, ladder brace, made in USA, mahogany, Martin acoustic, ohio, OOO-28, rosewood, spruce, stauffer, steel string, The Twelfth Fret, toronto, Vintage

There isn’t a lot of information about C. A. Potter Criterion guitars but these were built around 1905 in Cleveland, Ohio. This was a higher-end instrument with features taken from other makers. Notably, the neck and head joints show significant influence from the Martin-Stauffer instruments built around the 1830s. It’s interesting how some of the features found on these early instruments have come back in improved form. On the Potter Criterion, there is a bolt through the heel to secure the neck joint – an arrangement used in a slightly different way by many modern builders including Taylor.

Vintage

This instrument has sold

Taylor GS Custom Venetian Cutaway Maple, 2012

On August 27, 2019 /

Here we’re looking at a Taylor GS Custom, or Custom GS, dating to December 20, 2012 and in very good, clean condition. This guitar sports a Sitka Spruce top, vividly flamed Maple for the back and sides, Maple again for the fingerboard, and Ebony for the bridge, head plate and bound fingerboard. The fingerboard carries a custom triangle inlay set.

Used

This instrument has sold

Huss and Dalton TD-M Custom Adirondack and Sinker Mahogany Dreadnought, 2014

On August 26, 2019 /

The Huss and Dalton TD-M Custom is, as the name suggests, and buyer-customized version of the ‘Traditional Dreadnought-Mahogany’ model, in this case with Adirondack Spruce top and Sinker Mahogany back and sides.The ‘Traditional Dreadnought’ dates back to around 1911, when C F Martin built a number of large bodied guitars for the Ditson company. In 1931, with the need for ever-increasing volume, Martin re-launched the design with then now-classic ‘D’ series guitars. This design has been the basis for many other guitar models by many other builders.

Used

This instrument has sold

Taylor 556ce 12 String Guitar, 2014

On August 22, 2019 /

The Taylor 556ce 12 string guitar gives a good illustration of how Taylor became one of the prominent builders of 12-strings. They sound great and play very well, but also Taylor’s unique neck joint makes the inevitable neck reset a simple matter of maintenance. Using the same type of comfortable neck profiles as their six-string guitars, but naturally a bit wider, the Taylor 556ce 12 is a breeze to play

Used

This instrument has sold

Steel String

Ron Belanger M12 12 String Guitar, 2008

Lowden L25 Jumbo Steel String Guitar, 1989

C. A. Potter Criterion Guitar, Circa 1905

Taylor GS Custom Venetian Cutaway Maple, 2012

Huss and Dalton TD-M Custom Adirondack and Sinker Mahogany Dreadnought, 2014

Taylor 556ce 12 String Guitar, 2014

THE TWELFTH FRET

MORE SERVICES